{"id":4916,"date":"2025-09-16T04:06:24","date_gmt":"2025-09-16T04:06:24","guid":{"rendered":"https:\/\/glover.gen.nz\/wordpress\/?p=4916"},"modified":"2025-09-29T22:54:36","modified_gmt":"2025-09-29T22:54:36","slug":"fashion-discs-3d-printing-and-306k-sewing-machine","status":"publish","type":"post","link":"https:\/\/glover.gen.nz\/wordpress\/fashion-discs-3d-printing-and-306k-sewing-machine\/","title":{"rendered":"Fashion Discs – 3D printing and 306K Sewing machine"},"content":{"rendered":"
\"\"<\/a>
Singer Fashion Disc Sampler, 3dp clones\u00a0 of discs 1 to 32 and 37, with 4 designs of my own, a kiwi fern, a straight stitch, a zigzag and an arrow head that pucker and tunnel less than the originals.<\/figcaption><\/figure>\n

Following from 3D Printing Singer Type A Fashion Discs<\/a> below, a whole bunch of stuff has happened.
\nFirstly I have created numerical designs of all 33 Type A Fashion Discs (1 through 32 and 37), basically a stitch position from the left side of the needle swing for each of the 18 stitches<\/p>\n

Numerical designs look something like this, showing a diagram of the stitch, translated into an offset number between 0 and 12 for use in the parameter file. The tooth height on the disc is 2.4mm (probably 2.38mm, or 3\/32″ really) but the pattern works in 0-12, as this is much easier when dealing with patterns that use half, quarter or thirds of the stitch width.<\/p>\n

I created parameter files for each disc using these numerical designs.<\/p>\n