{"id":4377,"date":"2024-09-07T10:04:24","date_gmt":"2024-09-07T10:04:24","guid":{"rendered":"https:\/\/glover.gen.nz\/wordpress\/?page_id=4377"},"modified":"2025-12-10T04:15:37","modified_gmt":"2025-12-10T04:15:37","slug":"my-singer-sewing-machines","status":"publish","type":"page","link":"https:\/\/glover.gen.nz\/wordpress\/daves-personal-blogs\/my-singer-sewing-machines\/","title":{"rendered":"My Singer Sewing Machines"},"content":{"rendered":"

This page is a summary of our chorus of Singer sewing machines, in build year sequence<\/p>\n

28K F1880493 1911 Rococo Decals<\/h3>\n
\"\"<\/a>
Singer 28K Treadle Sewing Machine<\/figcaption><\/figure>\n

Owned this one for over 40 years, previously owned by my wife’s mother, and her mother, and her mother too. Four generations of owners in the same family. Treadle machine converted to electric, well used and in need of restore – eventually.<\/p>\n

There is a bit of a write up on this machine in this post about the 1960 99K31S below<\/a><\/p>\n

Sewtric motor and controller.<\/p>\n

99K13 EE168179 1947<\/h3>\n
\"\"<\/a>
Singer 99K13<\/figcaption><\/figure>\n

Recently completed the restore, mechanically stripped down and all wearing surfaces cleaned. Runs like a dream, smooth and quiet. A beautiful little machine with almost perfect Filigree decals and knee control.<\/p>\n

Singer BRK 2-12 motor with grease wicks. Knee controller in machines base. 3 flat pin plug.<\/p>\n

201K3 EF725774 1950 Paper Clip decals<\/h3>\n
\"\"<\/a>
Singer 201K3<\/figcaption><\/figure>\n

Just finished the restore, lovely condition, good paint and decals, knee controller. Like all 201Ks, runs like a dream but a bit finnicky to set up.<\/p>\n

Singer BRK 12-S motor with grease wicks. Knee controller in machines base. 3 flat pin plug<\/p>\n

This machine has been converted into a hand crank machine, as part of the work on the 306K below<\/a><\/p>\n

306K EJ645804 1954 Triangles decals<\/h3>\n
\"\"<\/a>
306k front view<\/figcaption><\/figure>\n

Bought Jan 2025<\/a> for $40. Still to be restored, but excellent condition and I am looking forward to working on it. My first zigzag machine. Oiled and turning over fine, but lots of adjustments needed!<\/p>\n

No motor or cabinet at this stage.<\/p>\n

First post after purchase<\/a><\/p>\n

Some updates since the machine was purchased.<\/a><\/p>\n

Some more progress<\/a><\/p>\n

201K23 EK674233 1955 Paperclip decals<\/h3>\n
\"\"<\/a>
201K23 aka The Ugly Duckling<\/figcaption><\/figure>\n

I wasn’t going to add this machine to the list, the idea was to get rid of it asap. We only bought it because it came in a cabinet we really wanted. The cabinet was a “Senior Cabinet”, the same as the “Cadet Cabinet” we put our 99K31 in (see below) but with a table top cut for a full size machine such as a 201, a 66 or a 15. We had a 15K110 in a nasty white suitcase which we wanted to re-home.<\/p>\n

So we did the swap, more on the 15K below.\u00a0 The 201K is one of the modern design version 2 shapes, that look like a 50s spaceship design. It has reasonable graphics and paint, but needed a really good service, a lot of fluff removal and polishing, adjustment of the end float on the main shaft, and some reshaping of the spring in the upper thread tensioner.<\/p>\n

It seems to look better in the 1950s suitcase than the 15 did, and even the Elna foot control seems to look good with it. The motor is a bit noisy (the next job).<\/p>\n

It took a bit of fettling to get stitching correctly, I had to retime it, make sure it had a good needle (Singer or Schmetz), good thread (Guttenburg) and a proper type 66 bobbin, not a cheap and nasty Birch one. These 201K machines seem really finicky, great when they are working though.<\/p>\n

The bobbin winder was not aligned correctly, the arm which holds the bobbin on to the winder, and detects when the winder is full was offset. It was\u00a0 offset to the left which was pulling the bobbin off the pin. As there is no way of adjusting this I assumed it was bent, and bent it back to centre.<\/p>\n

It looks really good, sews a lovely stitch, and is the lightest machine I own, making it more portable than my 185K of my 99K13. The Elna foot control makes it easy to control too. It was also made in 1955, which is my birth year too! It might be a keeper, maybe I will get rid of the 185K.<\/p>\n

Singer BAK 4-12 motor with grease wicks. Elna foot controller wired to Singer 3 flat pin plug.<\/p>\n

Update – this machine now lives with Victoria and Jared, has been renamed ‘Brutus’ and is being worked quite hard by Jared making lots of clothes for himself.<\/p>\n

319K EM198869 1957 Triangles decals<\/h3>\n
\"\"<\/a>
Singer 319k<\/figcaption><\/figure>\n

Bought off TradeMe 8\/12\/25 for $10.<\/p>\n

When I saw this it was difficult to resist. I knew it wouldn’t sell, the pictures and lack of real details made it quite unattractive. I wasn’t convinced that the piano keys were actually attached when I saw the photos, and various other items couldn’t be confirmed as present.<\/p>\n

I have cleaned it up and lubricated it fully, and it spins over quite nicely. I have repaired and modified the bobbin carrier. Which had serious damage caused by needle strike when carrier was not seated correctly. I did some basic set up, and within a day of returning home with it had it stitching.<\/p>\n

It came with a full set of 26 fashion discs, and has 5 discs in the machine, making a full set of #1 to #31 available. There were 6 type L bobbins, and all but two of the feet were in the box too.<\/p>\n

I have modified the bobbin carrier so that the machine can use 15×1 Universal needles, which also means it can use 15×1 twin needles, and I have successfully created twin stitching.<\/p>\n

There is still a lot to do, but this machine is a keeper, one of the first batch of 319k out of Kilbowie, and very few hours of use by the look of it (possibly because of the damaged bobbin carrier).<\/p>\n

It came in a wooden base with a fold down extension table, but the case was not included. No foot controller was included, but the BAK 4-12 motor has a 3 flat pin connector, so I can use the foot controller off my 1960 99k for now.<\/p>\n

15K110 EN744350 1958 RAF decals<\/h3>\n
\"\"<\/a>
Singer 15K110<\/figcaption><\/figure>\n

Restored and cleaned. A portable with foot control, cloth covered plywood carry case with varnished wood base. “RAF” decals and paintwork in immaculate condition. Had some troubles<\/a> when I reinstalled the needle bar incorrectly, but works well now.<\/p>\n

Oct 4 2024 we finally managed to find a Senior Cabinet, also known as an Ardmore or a type 72. It needs a full restore, but it is in basically good condition. I repaired the leaf support bar so that the leaf is held level and the bar pops out when the lid is lifted. The 15K110 has been installed in it, and has pride of place in our “library”.<\/p>\n

Singer BAK 4-12 motor, foot controller, 3 round pin plug.<\/p>\n